Eau Claire, WI 54703
Toll Free: 800-854-0021
Fax: (715) 839-8145
email: sales@ldpi-inc.com

Dock lighting illuminates truck trailers, allowing workers to load and unload faster with fewer mistakes and reduced risk of accidents. Adjusting the position of the head and the arm allows the light to be aimed at the front or back of the trailer, into corners, or high above stacked boxes. If an errant fork truck strikes the fixture, the dock light simply swings out of the way.

Task lighting illuminates work spaces, allowing tasks to be done faster, safer, more comfortably, and with fewer mistakes. Adjusting the position of a task light allows workers to minimize shadows or glare and maximizes the flexibility of their work space. Task lighting should be considered for any work station where precision is required.

Modular design means lower maintenance costs and greater flexibility. If a light head is damaged, keep the arm and replace just the head. If a different lamp type is desired, simply plug a new head into the existing arm.
(Modular excludes Wet location and Explosion Proof dock lights.
These fixtures are hard wired.)

Quality materials and insightful design make the LDPI, Inc.
dock light the toughest available.

INCANDESCENT DOCK LIGHTING HEAD

Light heads include a recessed 3-prong IEC type plug which will plug directly into the receptacle of any single strut modular arm. One light head and one single strut arm make a complete modular dock light. 
42” modular arm available.
Uses PAR or BR lamp - not included

• Lowest initial cost
• Instant on
• Excellent color rendering
• Up to 4,200 hours of lamp life
• Output: Up to 3,700 lumens
• Available up to 300 Watts
• Wire guard included (not shown)
• Not available in 277 volt

METAL HALIDE DOCK LIGHTING HEAD

Light heads include a recessed 3-prong IEC type plug which will plug directly into the receptacle of any single strut modular arm. One light head and one single strut arm make a complete modular dock light.
42” modular arm available.
Uses ED17 Med. lamp - included.

• Lowest initial cost
• Excellent color rendering
• Requires brief startup
• Up to 15,000 hours of lamp life
• Output: Up to 6,000 initial lumens
• Available in 70 Watts
• Lamp and glare guard included

42" SINGLE STRUT MODULAR ARM

• On-Off rocker switch and IEC type receptacle
• Wear resistant 3-conductor AC cord from arm
• Male plug on light head cord plugs into female
  receptacle in arm
• 1 ½" square steel tube arms
• Wrist-action zinc plated steel joints
  on single strut
• Washers at all joints
• Bushings at bracket joints

Wet location models are ideal for use outdoors or in wet indoor environments.
Available with incandescent and metal halide heads with a 42” arm.

• Silicone gasket seals out dirt and moisture
• Tempered glass lens and wire lens guard are standard
• Rugged cast aluminum is copper free for
  greater corrosion resistance
• Weather-tight fitting seals out moisture around the cord
• Prewired weather proof switch
• Zinc plated steel hardware resists corrosion

INCANDESCENT
ONLY

METAL HALIDE
ONLY

Explosion proof models are ideal for task lighting in hazardous environments,
including Class I, Div.1 areas. Available with incandescent and metal halide
heads with a 26 ”arm.

• Shell and cover are corrosion resistant cast,
  marine grade low copper content aluminum with a thermoset powder-coated safety yellow finish.
• 3/4” thick tempered glass lens resists thermal shock
  and impact damage
• Wire entrance is factory sealed
• Threaded joints between shell and cover permit internal pressure to be dissipated and provide a cooling path for escaping gases