SPECS

SPECS

The following is an acceptable method of installing panel mounted
fixtures into the corner of a paint spray booth.

Requirements:

• Fixture must be rated Class I, Division 2 and have inside access listing for use in a paint spray booth.
• Panel construction must meet the requirements of NFPA 33 Chapter 3,
  "Construction and Design of Spray Areas, Spray Rooms, and Spray Booths."
• Fixture installation wiring to meet the requirements of NFPA 33 Chapter 4,
  "Electrical and Other Sources of Ignition."

Fixture Compatibility:

• Slim light series: 390440J-3546
• FIXTURE SOLD SEPARATELY