Product Details

260 LED Series Panel Mount Vapor/Dust Proof Paint Booth Fixture

Product Overview

The 260 LED Series is a product designed specifically for Paint Spray Booths. This 4 lamp 4’ fixtures are available with LED T8 replacement lamps. This fixture can be built with low and standard ballast factor ballasts and are available with 5000K LEDs. The 260 LED Series allows for both Front and Rear access using a paint spray cutoff switch when the front door frame is opened. The 260 LED unit carries multiple listings from ETL for Class I Div. 2 & Class II Div. 2 applications. Must be mounted hinge side up.  LED lamps included.

features

20 Gauge steel construction with white power coat which creates a durable, highly reflective finish.
Front or rear accessibility
40% + energy savings compared to F32 T8 fluorescent lamps
50,000 hours

performance

L: Low Ballast Factor Ballast 50 watts
 (5800 lumens)
S: Standard Ballast Factor Ballast 58 watts
 (6600 lumens)
120 - 277 Volt

note

Normally open magnetic switches are intended to be used to trigger a relay (furnished by others) which disables the paint system. Because of the small
capacity of the switch a solid state relay is recommended. It may be desired by others to utilize a separate power supply to segregate the relay
(furnished by others) from the lighting power supply. The magnetic switch IS NOT designed to directly control light operation! The magnetic switch is rated for 10 watts resistive at a maximum of 300 VAC.

More Information

caution

Overloading the switch circuits WILL cause failure.
LDPI, Inc. recommends having a certified electrician/engineer review
loads to ensure that overloading of switch does not occur.

UL / Class Listings

  • Class I Division 2
  • Class II Division 2

Series: 260 LED

  • 390260-LED

Options: 260/261 LED - Source

  • L: Low ballast factor
  • S: Standard ballast factor

Options: 260/261 LED - CCT

  • 5: 5000K

Options: 260/261 Series

  • 5902: 8 Ft. 3-wire whip (260)

Related Products

Related Categories