261 Series Panel Mount Vapor/Dust Proof Fluorescent Light Fixture
The 260 and 261 Series is a product designed specifically for Paint Spray Booths.
These 4 lamp 4’ fixtures are available in 32 watts.
The 260 Series allows for both Front and Rear access using a paint spray cutoff switch when the front door frame is opened.
The 261 Series is a rear access only fixture and does not require paint spray cutoff.
Both units carry multiple listings from ETL for Class I Div. 2 & Class II Div. 2 applications.
Must be mounted hinge side up. Lamps not included.
LAMPS SOLD SEPARATELY.
ETL listed for U.S. and Canada.
Housing styles for either front or rear accessibility in the Series 260, or rear access only in the Series 261.
20 Gauge steel construction with white baked enamel finish which creates a durable, highly reflective finish.
3/16" Clear tempered glass
Paint spray cutoff switch for the front door frame access of the 260 Series.
Available in 32 watts with T8 lamps.
Voltages of 120, 277, & 347 volts.
Normally open magnetic switches are intended to be used to trigger a relay (furnished by others) which disables the paint system. Because of the small capacity of the switch a solid state relay is recommended. It may be desired by others to utilize a separate power supply to segregate the relay (furnished by others) from the lighting power supply. The magnetic switch IS NOT designed to directly control light operation! The magnetic switch is rated for 10 watts resistive at a maximum of 300 VAC.
Overloading the switch circuits WILL cause failure. LDPI, Inc. recommends having a certified electrician/engineer review loads to ensure that overloading of switch does not occur.
CSA 22.2 No. 137.0
UL 1598 Wet / Damp, Paint Spray
CSA 22.2 No. 250.0
Class I D2 Groups A,B,C,D T3C 160°C
Class II D2 Groups F,G T3C 160°C
40°C Ambient Rating
- PrePainted Steel
- T8 Linear Fluorescent
- 4 Lamp
- 4 ft
- 120 V
- 208 V
- 220 V
- 240 V
- 277 V
- 347 V
Options: 260/261 Series
- EM (T8 emergency ballast)
- 5901: 8 Ft. 3-wire whip (261)
- 2 Lamp Fixture: Consult Factory (Varies by ballast)
Options: 260/261 Series - Mount
- 1704 (panel stiffener mounting kit) (fits 18 ga. panels only)