281 Series 8 Ft. Panel Mount Vapor/Dust Proof Fluorescent Light Fixture
The 281 Series is a product designed specifically for Paint Spray Booths. With a wider fixture design these products will provide increased photometric output and efficiencies. These 4 lamp 8’ fixtures are available in wattages including 59 and 86 watts.
The 280 Series allows for both Front and Rear access using a paint spray cutoff switch when either front door frame is opened.
The 281 Series is a rear access only fixture and does not require paint spray cutoff.
Both units carry multiple listings from ETL for Class I Div. 2 & Class II Div. 2 applications. ETL listed for U.S. and Canada. Must be mounted hinge side up. Lamps not included. LAMPS SOLD SEPARATELY (All Options Ordered Separately). Listed for locations having deposits of readily combustible paint residues.
Housing styles for either front or rear accessibility in the Series 280, or rear access only in the Series 281.
20 Gauge steel construction with white baked enamel finish which creates a durable, highly reflective finish.
3/16” clear tempered glass
Paint spray cutoff switch for each front door frame access of the Series 280.
Available in 59 and 86 watts in T8 and T8HO lamps.
Voltages of 120, & 277 volts.
Normally open magnetic switches are intended to be used to trigger a relay (furnished by others) which disables the paint system. Because of the small capacity of the switch a solid state relay is recommended. It may be desired by others to utilize a separate power supply to segregate the relay (furnished by others) from the lighting power supply. The magnetic switch IS NOT designed to directly control light operation! The magnetic switch is rated for 10 watts resistive at a maximum of 300 VAC.
Overloading the switch circuits WILL cause failure. LDPI, Inc. recommends having a certified electrician/engineer review loads to ensure that overloading of switch does not occur.
- 8 ft
- 4 Lamp
UL / Class Listings
- NFPA 33 Paint Spray Applications
- UL 1598 Ordinary Locations
- UL 844 Hazardous Location Lighting
- Class I Division 2
- Class II Division 2
Options: 280/281 Series - Mount
- 1728 (panel stiffener mounting kit)
Options: 280/281 Series
- EM (T8 emergency ballast)
- 5901: 8 Ft. 3-wire whip (281)
- PrePainted Steel
- 120 V
- 208 V
- 220 V
- 240 V
- 277 V
- T8HO Linear Fluorescent
- T8 Linear Fluorescent