Slim LED Series Vapor/Dust Proof Paint Booth Fixture
The Slim Light LED Series features a 20 Ga. white powder coat steel housing that is only 2 ¼” thick. The Slim LED Series is available as a 4’ fixture with 2, 4 and 6 LED lamp options, it can be built with low and standard ballast factor ballasts and is available with 5000K LEDs. This series provides a hinged front door lens assembly with a paint spray cutoff switch when opened. This fixture must be installed with the hinge side up when being horizontally mounted. LED lamps and 8 Ft. wire whip included. Contact LDPI for availability of 5000K Lamp versions.
20 Gauge steel construction with white powder coat
which creates a durable, highly reflective finish.
Hinged front lens assembly for convenient access
2 1/4” depth minimizes the space needed in the paint spray booth for the fixture
40% + energy savings compared to F32 T8 fluorescent lamps
3/16” clear tempered glass
L: Low Ballast Factor Ballast 25 - 75 watts
S: Standard Ballast Factor Ballast 29 - 87 watts
120 - 277 Volt
Normally open magnetic switches are intended to be used to trigger a relay (furnished by others) which disables the paint system. Because of the small capacity of the switch a solid state relay is recommended. It may be desired by others to utilize a separate power supply to segregate the relay (furnished by others) from the lighting power supply. The magnetic switch IS NOT designed to directly control light operation! The magnetic switch is rated for 10 watts resistive at a maximum of 300 VAC.
Overloading the switch circuits WILL cause failure.
LDPI, Inc. recommends having a certified electrician/engineer
review loads to ensure that overloading of switch does not occur.
UL / Class Listings
- Class I Division 2
- Class II Division 2
Series: Slim Light LED
Options: Slim LED - Source
- L: Low ballast factor
- S: Standard ballast factor
Options: Slim LED - CCT
- 5: 5000K