LE481 LED Series Front Access Industrial Paint Booth Light Fixture
The LE481 Series is a hinged, front access, recessed mount, LED paint booth luminaire. The LE481 is made of a combination of 20 gauge cold rolled steel and .090 aluminum. This LED fixture is available in 4 Ft. lengths with 1, 2, or 3 rows of LED's; replacing your standard 2, 4, and 6 lamp fluorescent fixture. This fixture can be used with or without optics, has dimming capabilities, and is available with an EM option.
20 Gauge Steel Powder Coated White Housing
Hinged, Inside (Front) Access Panel
4 Ft. Length
Clear Tempered Glass Lens
5 wire Whip (8') Standard
Fits the Same Opening as Slim Light Series
58W - 218W (5600Lm - 26000Lm)
Withstands up to a 160°F (71°C) Bake Cycle for 90 Minutes
Normally open magnetic switches are intended to be used to trigger a relay (furnished by others) which disables the paint system. Because of the small
capacity of the switch a solid state relay is recommended. It may be desired by others to utilize a separate power supply to segregate the relay (furnished by others) from the lighting power supply.
The magnetic switch IS NOT designed to directly control light operation!
The magnetic switch is rated for 10 watts resistive
at a maximum of 300 VAC.
Overloading the switch circuits WILL cause failure. LDPI, Inc. recommends having a certified electrician/engineer review loads to ensure that overloading of switch does not occur.
UL844 / CSA-C22.2 No.137
CI D2 Grps A,B,C,D
CII D2 Grps F,G
Paint Spray Listed
1598 / CSA-C22.2 No.250 (Wet/Damp)
Lumen Maintenance (L70): >54,000 hrs. (reported)
-30°C to 55°C Ambient Rating
DLC - Consult Factory
Series: LE481 - Dimming
- Blank: None
- D1: 0-10V
- SP: Surge Protection
- EM: Battery/Driver Backup (90 Min.)
- SR: Solid State Relay
Certifications / Ratings
- -30°C to 55°C Ambient
- 4 Ft.
- UL1598 Wet/Damp
- UL844 Paint Spray Listed
- UL844 Hazardous Location
- CI D2 Grps A,B,C,D
- CII D2 Grps F,G
- 120-277VAC (50/60Hz)
- Blank (None)
- Diffused Acrylic