Industrial Lighting, Relamping and FAQs
Here we've gathered a few articles discussing lighting and lighting products.
Sunday, June 2, 2002
• Straight blade plugs and receptacles
• Locking plugs and receptacles
• 20A / 30A - 3, 4, and 5 wire locking plugs and receptacles
Wednesday, January 2, 2002
This document is intended as a simplified guide through hazardous and extreme conditions as found in many industrial applications. For actual installations, use the NEC/CEC code book and IEC/CECELEC approvals and wiring codes as final authority on any installation. All design should be performed by licensed professional engineers and installation should be performed by competent licensed electrical contractors.
Friday, December 21, 2001
Group relamping is one of the most important aspects of lighting maintenance. Based on careful planning, scheduled group relamping involves calculating the average rated life and the average output of the lamps in your fixtures.
Friday, April 30, 1999
Selecting the proper lighting for spray booth applications is critical to help optimize quality of workmanship and productivity. The type and size of the booth also has a direct bearing on the number, type, and size of the light fixtures needed to achieve proper lighting conditions. In general, the larger the size of the booth, the increased number of fixtures needed.